VW JETTA 2007 – Anti-lock brake system (ABS) with electronic differential lock (EDL) and traction control system (TCS) and electronic stabilisation program (ESP), (T47) . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW JETTA 2007 - Battery - Brake light switch - Lateral acceleration sender - Yaw rate sender - ESP sensor unit - ABS control unit - Onboard supply control unit

A	Battery
C	Alternator
F	Brake light switch
G200	Lateral acceleration sender
G202	Yaw rate sender
G419	ESP sensor unit
J104	ABS control unit
J220	Motronic control unit
J519	Onboard supply control unit
SA1	Fuse 1 in fuse holder A
SB	Fuse holder B
SB1	Fuse 1 on fuse holder B
SB2	Fuse 2 on fuse holder B
SB4	Fuse 4 on fuse holder B
SB16	Fuse 16 on fuse holder B
SC	Fuse holder C
SC2	Fuse 2 on fuse holder C
SC4	Fuse 4 on fuse holder C
T4y	4-pin connector
T40	40-pin connector
T47	47-pin connector
T94	94-pin connector
1	Earth strap, battery - body
12	Earth point, on left in engine compartment
507	Threaded connection (30), on battery fuse holder
638	Earth point, on right A-pillar
652	Earth point, engine and gearbox earth
A2	Positive connection (15), in dash panel wiring harness
A20	Positive connection (15a), in dash panel wiring harness
A199	Positive connection 4 (15a) in dash panel wiring harness
B131	Connection (54), in interior wiring harness
*	E-box high
*2	E-box low
*3	From December 2005
*4	Up to December 2005

G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS control unit
N133	Rear right ABS inlet valve
N134	Rear left ABS inlet valve
N225	Vehicle stabilization program switch valve 1
N226	Vehicle stabilization program switch valve 2
T47	47-pin connector
D146	Connection (rear left speed sensor +), in engine compartment wiring harness
D147	Connection (rear left speed sensor -), in engine compartment wiring harness
D148	Connection (rear right speed sensor +), in engine compartment wiring harness
D149	Connection (rear right speed sensor -), in engine compartment wiring harness
D184	Connection (front left speed sensor +), in engine compartment wiring harness
D185	Connection (front left speed sensor -), in engine compartment wiring harness

E256	TCS and ESP button
G201	Brake pressure sender 1
J104	ABS control unit
K216	ESP and TCS warning lamp 2
L71	Traction control switch illumination bulb
N99	Front right ABS inlet valve
N100	Front right ABS outlet valve
N101	Front left ABS inlet valve
N102	Front left ABS outlet valve
N135	Rear right ABS outlet valve
N136	Rear left ABS outlet valve
N227	Vehicle stabilization program high-pressure valve 1
N228	Vehicle stabilization program high-pressure valve 2
T6ad	6-pin connector
T47	47-pin connector
V64	ABS hydraulic pump
43	Earth point, lower part of right A-pillar
372	Earth connection 7, in main wiring harness
374	Earth connection 9, in main wiring harness
382	Earth connection 17, in main wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness

G85	Steering angle sender
J519	Onboard supply control unit
J527	Steering column electronics control unit
T20d	20-pin connector
B238	Positive connection 2 (58b), in interior wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
B397	Connection 1 (convenience CAN bus, high), in main wiring harness
B406	Connection 1 (convenience CAN bus, low), in main wiring harness

F9	Handbrake warning switch
F34	Brake fluid level warning contact
G34	Front left brake pad wear sender
H3	Buzzer and gong
J285	Control unit in dash panel insert
J533	Data bus diagnostic interface
K47	ABS warning lamp
K118	Brake system warning lamp
K155	ESP and TCS warning lamp
T2v	2-pin connector
T2w	2-pin connector
T2y	2-pin connector
T20	20-pin connector
T36	36-pin connector
376	Earth connection 11, in main wiring harness
381	Earth connection 16, in main wiring harness
655	Earth point, on left headlight
B379	Connection 1 (brake pad wear indicator), in main wiring harness
B380	Connection 2 (brake pad wear indicator), in main wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
B397	Connection 1 (convenience CAN bus, high), in main wiring harness
B406	Connection 1 (convenience CAN bus, low), in main wiring harness