Čeština
Dansk
Deutsch
Ελληνικά
English
English
Español
Français
Français
עברית
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Русский
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
Wiring Diagram VW CADDY 2016 - Rear parking aid warning buzzer - Parking aid control unit - Data bus diagnostic interface
| H15 | Rear parking aid warning buzzer, on left under dash panel |
| J446 | Parking aid control unit |
| J533 | Data bus diagnostic interface |
| SC11 | Fuse 11 on fuse holder C |
| T20 | 20-pin connector, red |
| T26d | 26-pin connector, black |
| 374 | Earth connection 9, in main wiring harness |
| 375 | Earth connection 10, in main wiring harness |
| 377 | Earth connection 12, in main wiring harness |
| B383 | Connection 1 (powertrain CAN bus, high), in main wiring harness |
| B390 | Connection 1 (powertrain CAN bus, low), in main wiring harness |
| * | Only left-hand drive models |
| *2 | Only right-hand drive models |
Wiring Diagram VW CADDY 2016 - Rear left parking aid sender - Rear centre left parking aid sender - Rear centre right parking aid sender - Rear right parking aid sender - Parking aid control unit
| G203 | Rear left parking aid sender |
| G204 | Rear centre left parking aid sender |
| G205 | Rear centre right parking aid sender |
| G206 | Rear right parking aid sender |
| J446 | Parking aid control unit |
| T3ba | 3-pin connector, black |
| T3bb | 3-pin connector, black |
| T3bc | 3-pin connector, black |
| T3bd | 3-pin connector, black |
| T8x | 8-pin connector, behind rear bumper on right, black |
| T26d | 26-pin connector, black |
| 352 | Earth connection (parking aid), in rear bumper wiring harness |
| X68 | Positive connection (parking aid), in rear bumper wiring harness |
VW CADDY 2016 Overview of fuses
| Overview of fuses |
| 1 - | Fuses (SA) on fuse holder A |
| q | Fuse assignment, from June 2015 |
| 2 - | Fuses (SB) on fuse holder B |
| q | Fuse assignment, from June 2015 |
| 3 - | Fuses (SC) on fuse holder C |
| q | Fitting location right-hand drive |
| q | Fuse assignment, from June 2015 |
|
| 1 - | Fuse holder A -SA- |
| Fuse colours for MIDI strip fuse: |
| t | 200 A - purple |
| t | 150 A - grey |
| t | 125 A - pink |
| t | 100 A - blue |
| t | 80 A - white / transparent |
| t | 70 A - brown |
| t | 60 A - yellow |
| t | 50 A - red |
| t | 40 A - green |
| t | 30 A - orange |
Note:
|
| Fuses (SB) on fuse holder B |
| Fitting location of fuse holder B -SB- |
| On left in engine compartment, on E-box. |
| 1 - | Fuse holder B -SB- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
| Fuse colours for Maxi ATO flat fuse: |
| t | 60 A - blue |
| t | 50 A - red |
| t | 40 A - orange |
| t | 30 A - light green |
| t | 20 A - yellow |
|
| Fuses (SC) on fuse holder C |
| Fitting location, fuse holder C -SC- , left-hand drive |
| under dash panel on left. |
| 1 - | Fuse holder C -SC- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
|
| 1 - | Fuse holder C -SC- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
|
