Fiat 500 1.3 Multijet – HORNS – – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

WIRING DIAGRAM - HORNS - Fiat 500 1.3 Multijet

HORNS - WIRING DIAGRAM Fiat 500 1.3 Multijet

Get access to all wiring diagrams of the car

COMPONENTS - HORNS - Fiat 500 1.3 Multijet

Component Code	Description	Reference to the operation
A001	BATTERY
B001	JUNCTION UNIT
C010	LEFT FRONT EARTH	-
C015	DASHBOARD EARTH, DRIVER'S SIDE	-
D001	FRONT/DASHBOARD COUPLING	-
D047	CLOCK SPRING COUPLING
P005	SINGLE-TONE HORN

COMPONENT LOCATION - HORNS - Fiat 500 1.3 Multijet

HORNS - COMPONENT LOCATION Fiat 500 1.3 Multijet

Get access to all wiring diagrams of the car

Component Code	Description	Reference to the operation
A001	BATTERY
B001	JUNCTION UNIT
C010	LEFT FRONT EARTH	-
C015	DASHBOARD EARTH, DRIVER'S SIDE	-
D001	FRONT/DASHBOARD COUPLING	-
D047	CLOCK SPRING COUPLING
P005	SINGLE-TONE HORN

DESCRIPTION - HORNS - Fiat 500 1.3 Multijet

The vehicle is equipped with a single-tone horn.The horn is operated by pressing the two side areas of the horn cover (around the air bag).The circuit for the horn is protected by a dedicated fuse and is operated by a dedicated relay, located in the engine compartment junction unit.For safety reasons, the horn can be operated at any time, even with the ignition OFF or the key extracted.

FUNCTIONAL DESCRIPTION - HORNS - Fiat 500 1.3 Multijet

The horn P005 receives a power supply via relay T03, located in the engine compartment junction unit B001, via the direct battery line protected by fuse F10 of the same junction unit.The coil for relay T03 of B001 (pin 41 of connector B) is energized by an earth signal when the switch on the steering wheel is closed (pin 8 of the clock spring D047). Pin 7 of the clock spring D047 is connected to the left dashboard earth C015.Relay T03 thereby supplies the horn P005 from pin 39 of connector B of the engine compartment junction unit B001.The horn P005 is connected to the left front earth C010.