Fiat MULTIPLA 1.6 16v da 06/99 a 03/02 – SIDE LIGHTS / NO. PLATE LIGHTS – – Euro 3 – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

Wiring diagram

Get access to all wiring diagrams of the car

Components

Component code

Name

Assembly reference

Junction unit

MAXI FUSE box

Left front earth

Left front earth

Front earth right

Front earth right

Facia earth, driver's side

Left rear earth

Left rear earth

Rear right earth

Rear/tail-gate junction

Instrument panel

Left headlamp

Right headlamp

Rear left light cluster

F31

Rear right light cluster

F50

Left number plate light

F51

Right number plate light

Ignition switch

Stalk unit

2891942Op. 5550A stalk unit

Location of components

Get access to all wiring diagrams of the car

Components

Component code

Name

Assembly reference

Junction unit

MAXI FUSE box

Left front earth

Left front earth

Front earth right

Front earth right

Facia earth, driver's side

Left rear earth

Left rear earth

Rear right earth

Rear/tail-gate junction

Instrument panel

Left headlamp

Right headlamp

Rear left light cluster

F31

Rear right light cluster

F50

Left number plate light

F51

Right number plate light

Ignition switch

Stalk unit

2891942Op. 5550A stalk unit

DescriptionThe side lights are switched on when the ring nut on the steering column is turned to the first position, with the ignition in the ON position.They can also be turned on by extracting the key and turning it in the opposite direction - PARK position - keeping the special button pressed.Turning on the side lights also turns on the number plate lights and numerous other interior lights for passenger compartment lighting and instrument & control lighting (these lines are described and illustrated in the diagrams for the components to which they refer).The circuit for the side lights is protected by two fuses, in the junction unit; one for the right front and left rear side lights, the other for the left front and right rear side lights.A warning light in the instrument panel indicates that the side lights have been switched on.

Functional description The signal for activating the side lights reaches the ignition switch H1 (STAZ) when the steering column switch unit H5 - connector B pin 6 - is in the appropriate position: it is a supply controlled by the ignition (INT) for the line protected by fuse F8 of the junction unit B1 . Alternatively - with the key in the PARK position - the supply arrives directly from the battery (IGN maxifuse for B5 ). From switch H1 (POS) the supply is sent to the various side lights through the lines protected by fuses F2 and F3 for the junction unit B1 . The former protects the circuits for the right front F11 , left rear F30 and right number plate F51 lights. The second protects the circuits for the left front F10 , right rear F31 and left number plate F50 lights. At the same time, the side lights on warning light is supplied inside the instrument E50 - pin 29 of connector A -, whilst pin 1 of connector B of E50 provides the earth. The same signal dims the instrument light with the lights switched on.