Fiat PANDA 1.3 JTD 16v – DIRECTION INDICATORS / HAZARD WARNING LIGHTS – – SUV – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

Wiring diagram - DIRECTION INDICATORS / HAZARD WARNING LIGHTS - Fiat PANDA 1.3 JTD 16v

DIRECTION INDICATORS/HAZARD WARNING LIGHTS - WIRING DIAGRAM Fiat PANDA 1.3 JTD 16v

Get access to all wiring diagrams of the car

COMPONENTS - DIRECTION INDICATORS / HAZARD WARNING LIGHTS - Fiat PANDA 1.3 JTD 16v

Component code	Description	Reference to the assembly
C11	Right front earth	-
C20	Passenger dashboard earth	-
C30	Left rear earth	-
E50	Instrument panel
F19	RIGHT FRONT DIRECTION INDICATOR
F20	Left side direction indicator
F30	Left rear light cluster
H1	Ignition switch
H90	Switch control panel

Component location - DIRECTION INDICATORS / HAZARD WARNING LIGHTS - Fiat PANDA 1.3 JTD 16v

DIRECTION INDICATORS/HAZARD WARNING LIGHTS - COMPONENT LOCATION Fiat PANDA 1.3 JTD 16v

Get access to all wiring diagrams of the car

Description - DIRECTION INDICATORS / HAZARD WARNING LIGHTS - Fiat PANDA 1.3 JTD 16v

The left and right direction indicators are turned on by raising or lowering the left steering column switch unit lever.The hazard warning lights (right and left side indicators operated simultaneously) are activated by means of a red button on the control panel.The direction indicators are ignition-operated but the hazard warning lights can always be operated for safety reasons because they are supplied directly by the battery.Two warning lights on the instrument panel, also intermittent, indicate activation of the right and left indicators. They come on simultaneously if the hazard warning lights are activated.The body computer node:manages the individual direction indicators, located at the front, in the rear light clusters and in the side direction repeaters;monitors the correct operation of the system, signalling any fault by turning on the appropriate lights failure warning light in the instrument panel.

Operational description - DIRECTION INDICATORS / HAZARD WARNING LIGHTS - Fiat PANDA 1.3 JTD 16v

The command to switch on the direction indicators is sent from the steering column switch unit H005 by turning switch A to position 1 (left side direction indicator) or position 2 (right side direction indicator).The body computer node M001:receives the negative signal (with reference to the earth C020 connector B) at pin 8 (left side) or at pin 9 (right side) connector P.767Earth C020 is secured to the passenger compartment floor and is positioned near the right front wheel arch (footwell area).Having received the signal, the direction indicators are switched on:from pins 10 and 11 connector C supplies the front direction indicators F018 and F019;from pins 15 and 18 connector F supplies the direction indicators housed in the rear light clusters F030 A and F031 Afrom pins 16 and 17 connector F supplies the direction indicators housed in the side repeaters F020 and F021The rear light clusters F030 A and F031 A and the left side direction indicator F020 refer to earth C030 fastened to the left rear wheel arch (passenger compartment interior).The hazard warning lights are switched on via the special button located in the control panel H090.The body computer node M001:receives the negative signal (with reference to earth C020 connector B) at pin 4 connector P;from pins 10 and 11 connector C supplies the front direction indicators F018 and F019;from pins 15 and 18 connector F supplies the direction indicators housed in the rear light clusters F030 A and F031 Bfrom pins 16 and 17 connector F supplies the direction indicators housed in the side repeaters F020 and F021from pin 3 connector P manages the intermittent operation of the LED for visually signalling the activation of the hazard warning lights integrated in the control panel H090.The body computer node monitors the correct operation of the lights system signalling any failure by switching on the "lights failure" warning light in the instrument panel E050 in the following circumstances:open load;short circuit to earth;short circuit to + battery.The body computer communicates, from pins 35, 36 connector I, via the CAN, with the instrument panel E050 (for more details), controlling the switching on of the warning lights.