Fiat PANDA 1.3 JTD 16v – REVERSING LIGHTS – – SUV – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

Wiring diagram - REVERSING LIGHTS - Fiat PANDA 1.3 JTD 16v

REVERSING LIGHTS - WIRING DIAGRAM Fiat PANDA 1.3 JTD 16v

Get access to all wiring diagrams of the car

COMPONENTS - REVERSING LIGHTS - Fiat PANDA 1.3 JTD 16v

Component code	Description	Reference to the assembly
B2	Junction unit under dashboard
H1	Ignition switch
M1	Body computer	5505A 2752925

Component location - REVERSING LIGHTS - Fiat PANDA 1.3 JTD 16v

REVERSING LIGHTS - COMPONENT LOCATION Fiat PANDA 1.3 JTD 16v

Get access to all wiring diagrams of the car

Component code	Description	Reference to the assembly
B2	Junction unit under dashboard
H1	Ignition switch
M1	Body computer	5505A 2752925

Description - REVERSING LIGHTS - Fiat PANDA 1.3 JTD 16v

The vehicle is equipped with a reversing light located in the right rear light cluster.This is operated whenever reverse is engaged via a switch fastened directly to the gear housing.The circuit is supplied with the ignition ON and protected by a fuse located in the underfacia junction unit.

Operational description - REVERSING LIGHTS - Fiat PANDA 1.3 JTD 16v

The reversing lights switch:receives an ignition-operated supply from the line protected by fuse F31 at pin 1;at pin 2, when reverse gear is engaged, supplies the signal to the body computer node M001, at pin 1 connector C.The body computer node, receives the signal:at pin 1 connector F supplies the reversing light, housed inside the left rear light cluster F030;at pin 6 connector F, sends the signal to the parking sensor control unit (where fitted) M084The right tail-light cluster F031 A has a reference earth C030, secured to the left rear wheel arch (passenger compartment interior).