COMPUTER DATA LINES – Isuzu Ascender 2003 – SYSTEM WIRING DIAGRAMS

COMPUTER DATA LINES

Computer Data Lines Wiring Diagram for Isuzu Ascender 2003

List of elements for Computer Data Lines Wiring Diagram for Isuzu Ascender 2003:

• class 2 serial data
• (not used)
• 4.2l
• 5.3l
• A11
• Audio amplifier (in rear compt, behind left side panel)
• Auto a/c manual a/c
• Auxiliary hvac control module (at rear of lower console)
• B11
• Body control module (bcm) (beneath left rear seat, on rear fuse block)
• Cigar fuse 13 20a
• Class 2 serial data
• Data link connector (below dash, above accelerator pedal)
• Driver's door module (on lower part of driver's door switch panel)
• Driver's memory seat module (mounted on underside of driver's seat)
• Electronic brake control module (on inner left frame rail, adjacent to transmission)
• F14
• Front passenger's door module (on lower part of passenger's door switch panel)
• G102 (at left side of engine compartment)
• G201 (near right front of lower console)
• Hot at all times
• Hvac control module (in dash center trim panel, beneath radio)
• Inflatable restraint sensing & diagnostic module (beneath lower console)
• Instrument panel cluster
• Liftgate module (inside liftgate)
• Passenger's memory seat module (mounted on underside of passenger's seat)
• Power distribution system
• Powertrain control module (pcm) (4.2l: on left front of engine) (5.3l: on left front of engine compt)
• Radio
• Splice pack sp201
• Splice pack sp205
• Splice pack sp306
• Tan
• Transfer case shift control module (4wd) (behind left lower dash)
• Underhood fuse block (on left side of engine compt)
• Vehicle communication interface module (under right rear seat)
• W/ bose sound system