ENGINE PERFORMANCE – Chrysler Sebring LX 1997 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

2.4L

2.4L, Engine Performance Wiring Diagrams (1 of 4) for Chrysler Sebring LX 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (1 of 4) for Chrysler Sebring LX 1997:

• (engine harness, in injector breakout) s114
• (engine harness, near breakout for starter motor) s118
• (left side of radiator support) battery temperature sensor
• (side of left front strut tower)
• (side of right front strut tower)
• (top of a/c compressor) a/c pressure transducer
• A/c pressure signal
• A142
• Asd rly out
• Asd rly output
• Body control module
• Ccd bus (+)
• Ccd bus (-)
• Ckp sensor sig
• Cmp sensor sig
• Cyl no.1
• Cyl no.2
• Cyl no.3
• Cyl no.4
• Downstream heated oxygen sensor
• Ect sensor sig
• Egr sol control
• Engine coolant temperature sensor (right front of engine)
• F12
• Fuel injectors (on top of engine)
• Fuse 11 10a
• Fused ign sw output (off/run/start)
• G102
• G102 (top of left front strut tower)
• G103
• Gen field driver
• Generator
• Gnd
• Gnd sensor
• Hot in off, run or start
• Iat signal
• Ign coil no.1
• Ign coil no.1
• Ign coil no.2
• Ignition (run/start)
• Ignition coil pack (top of valve cover)
• Inj no.1 driver
• Inj no.2 driver
• Inj no.3 driver
• Inj no.4 driver
• Instrument cluster
• Junction block (left side of dash)
• K11
• K12
• K13
• K14
• K17
• K19
• K20
• K21
• K22
• K24
• K35
• K41
• K42
• K44
• Knk sensor sig
• Malfunction ind (chk eng lp ctrl)
• Malfunction indicator lamp (check engine)
• Map sensor sig
• Nca
• Powertrain control module (left fender side shield)
• S101
• S109
• S111
• S131 (engine harness, pcm breakout)
• S132 (engine harness, in pcm connector breakout)
• S133 (engine harness, in ignition coil breakout)
• Sc on/off sw
• Sig sensor batt temp
• Tan
• To spark plugs
• Tp sensor signal
• Upstream heated oxygen sensor
• Upstrm htd ox sig
• V32
• Z12

2.4L, Engine Performance Wiring Diagrams (2 of 4) for Chrysler Sebring LX 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (2 of 4) for Chrysler Sebring LX 1997:

• (engine harness, inside pdc)
• (engine harness, near map/ iat sensor breakout) s115
• (engine harness, near map/iat sensor breakout) s116
• (engine harness, near noise suppressor breakout) s124
• Acc
• Automatic shut down relay (10)
• Camshaft position sensor (left side of cylinder head)
• Ckp sensor signal
• Cmp sensor signal
• Crankshaft position sensor (right rear of engine)
• Electronic egr transducer solenoid (left rear of engine)
• Fuse 10a
• Fuse 4 20a
• Fuse 5 20a
• Fuse 8 20a
• Hot at all times
• Ignition switch
• Intake air temperature sensor (lower center of intake)
• Knock sensor
• Lock
• Manifold absolute pressure sensor (right side of intake)
• Off
• Power distribution center (left fender side shield)
• Red
• Red/ tan
• Run
• S102
• S104
• S105
• S106
• S110 (engine harness, inside pdc)
• S117 (engine harness, near cam sensor breakout)
• S120 (engine harness, near pcm breakout)
• S121 (engine harness, in pcm breakout)
• S130 (engine harness, near pcm connector breakout)
• Sensor gnd
• Start
• Throttle position sensor (side of throttle body)
• Tp sensor signal

2.4L, Engine Performance Wiring Diagrams (3 of 4) for Chrysler Sebring LX 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (3 of 4) for Chrysler Sebring LX 1997:

• (left front of trunk)
• (on trunk lid)
• A/c compressor clutch relay (7)
• Ckp sensor signal
• Coil
• Cont- acts
• D21
• Engine starter motor relay (9)
• Fuel pump module (under left rear seat side)
• Fuel pump relay (3)
• G400
• G406
• High speed radiator fan relay (12)
• K22
• K24
• Low speed radiator fan relay (11)
• Nca
• Noise suppressor
• P/n
• Pnp switch sense
• Power distribution center (left fender side shield)
• Red
• Red/tan
• S301
• Sc on/off sw sense
• Sc sw signal
• Sc vac. sol. control
• Sc vent sol. control
• Sci transmit
• Sensor gnd
• Stop lamp sw sense
• Stop lamp switch (brake pedal bracket)
• T10
• T41
• Torque req sense
• Tps signal
• Trans sci receive
• Transmission control module (left fender side shield)
• Transmission range switch (left side of transmission)
• Vehicle speed control servo (left strut tower)
• Vehicle speed control/horn switch
• Vss signal

2.4L, Engine Performance Wiring Diagrams (4 of 4) for Chrysler Sebring LX 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (4 of 4) for Chrysler Sebring LX 1997:

• (engine harness, near pdc breakout)
• (left kick panel)
• (top of left front strut tower)
• A/c comp rly ctrl
• A/c press sig
• A14
• A21
• Auto shut dn rly
• Batt temp sns sig
• Body control module
• C18
• C24
• C27
• C28
• Ccd bus (+)
• Ccd bus (-)
• Controller anti-lock brake (right fender side shield)
• D20
• D21
• Data link connector (left of steering column, front of bcm)
• Dnstrm htd ox sig
• Duty cycle evap/purge solenoid (left strut tower)
• Evap/prge sol ctrl
• F12
• Fuel lvl sensor sig
• Fuel pmp rly ctrl
• Fuse 5 10a
• Fused b (+)
• Fused ign sw out (run/start)
• G102
• G200
• G200 (left kick panel)
• Gnd
• Gnd
• High spd rly ctrl
• Iac driver no.1
• Iac driver no.2
• Iac driver no.3
• Iac driver no.4
• Iac motor no.1 driver
• Iac motor no.2 driver
• Iac motor no.3 driver
• Iac motor no.4 driver
• Idle air control motor (side of throttle body)
• Junction block (left side of dash)
• K10
• K106
• K107
• K118
• K141
• K29
• K31
• K39
• K40
• K51
• K52
• K59
• K60
• Leak pmp sol ctrl
• Leak pmp sw sense
• Low spd rly ctrl
• P/s press sw sense
• Pnp sw sense
• Power steering pressure switch (left side of rack)
• Powertrain control module (left fender side shield)
• Red/tan
• S101
• S127
• S132 (engine harness, pcm conn breakout)
• S133 (engine harness, ignition coil breakout)
• S134 (engine harness)
• Sc sw signal
• Sc vac sol ctrl
• Sc vent sol ctrl
• Sci receive
• Sci transmit
• Sensor gnd
• Stop lp sw sense
• T10
• T41
• Torque req sense
• V35
• V36
• V37
• Vapor canister leak detector (right front corner of engine compartment)
• Vss signal
• Z11
• Z12

2.5L

2.5L, Engine Performance Wiring Diagrams (1 of 4) for Chrysler Sebring LX 1997

List of elements for 2.5L, Engine Performance Wiring Diagrams (1 of 4) for Chrysler Sebring LX 1997:

• (eng harn, fuel rail harness) s123
• (engine harness, between inj 2 & 4)
• (engine harness, near ect sensor breakout) s118
• (left side of radiator support) battery temperature sensor
• (right front of engine) a/c pressure transducer
• (side of right front strut tower)
• (top of left front strut tower)
• A/c pressure signal
• A142
• Asd rly out
• Asd rly output
• Body control module
• Ccd bus (+)
• Ccd bus (-)
• Ckp sensor sig
• Cmp sens sig
• Cmp sensor sig
• Cyl no.1
• Cyl no.2
• Cyl no.3
• Cyl no.4
• Cyl no.5
• Cyl no.6
• Distributor
• Downstream heated oxygen sensor
• Ect sensor sig
• Egr sol control
• F12
• Fuel injectors (on top of engine)
• Fuse 11 10a
• Fused ign sw output (off/run/start)
• G102
• G102 (top of left front strut tower)
• G103
• G110 (top left front of engine)
• Gen field driver
• Gnd
• Gnd sensor
• Hot in off, run or start
• Iat sensor signal
• Ign coil no.1
• Ign coil no.1 driver
• Ignition (run/start)
• Inj no.1 driver inj no.6 driver inj no.5 driver
• Inj no.2 driver
• Inj no.3 driver
• Inj no.4 driver
• Instrument cluster
• Junction block (left side of dash)
• K11
• K12
• K13
• K14
• K19
• K20
• K21
• K22
• K24
• K35
• K38
• K41
• K44
• K58
• Malfunction ind (chk eng lp ctrl)
• Malfunction indicator lamp (check engine)
• Map sensor sig
• Nca
• Powertrain control module (left fender side shield)
• S101
• S109
• S111
• S114
• S132 (engine harness, pcm connector breakout)
• S133 (engine harness, near ignition coil breakout)
• Sc on/off sw
• Sensor gnd
• Sig sensor batt temp
• Tan
• To spark plugs
• Tp sensor signal
• Upstream heated oxygen sensor (rear of generator)
• Upstrm htd ox sig
• V32
• Z12

2.5L, Engine Performance Wiring Diagrams (2 of 4) for Chrysler Sebring LX 1997

List of elements for 2.5L, Engine Performance Wiring Diagrams (2 of 4) for Chrysler Sebring LX 1997:

• (eng harn, inside pdc)
• (engine harness, inside pdc)
• (engine harness, inside pdc) s110
• (engine harness, near inj 6 breakout) s116
• (engine harness, near pcm breakout) s120
• Acc
• Asd rly output
• Automatic shut down relay (10)
• Ckp sensor signal
• Crankshaft position sensor (rear of distributor)
• Electronic egr transducer solenoid (left front of engine)
• Engine coolant temperature sensor (left side of engine)
• Fuse 10 10a
• Fuse 10a
• Fuse 4 20a
• Fuse 5 20a
• Fuse 8 20a
• Fuse 9 10a
• Gen field driver
• Generator
• Hot at all times
• Ignition switch
• Intake air temperature sensor (right rear of intake)
• Lock
• Manifold absolute pressure sensor (right side of intake)
• Near pcm connector breakout)
• Off
• Power distribution center (left fender side shield)
• Red
• Red/ tan
• Red/tan
• Run
• S102
• S104
• S105
• S106
• S115 (engine harness, near egr breakout)
• S121 (engine harness, in pcm break- out)
• S124 (engine harness, near distributor breakout)
• Sensor gnd
• Start
• Throttle position sensor (side of throttle body)
• Tp sensor signal

2.5L, Engine Performance Wiring Diagrams (3 of 4) for Chrysler Sebring LX 1997

List of elements for 2.5L, Engine Performance Wiring Diagrams (3 of 4) for Chrysler Sebring LX 1997:

• (left front of trunk)
• (on trunk lid)
• A/c compressor clutch relay (7)
• Ckp sensor signal
• Coil
• Cont- acts
• D21
• Engine starter motor relay (9)
• Fuel pump module (under left rear seat side)
• Fuel pump relay (3)
• G400
• G406
• High speed radiator fan relay (12)
• K22
• K24
• Low speed radiator fan relay (11)
• Nca
• Pnp switch sense
• Power distribution center (left fender side shield)
• Red
• Red/tan
• S301
• Sc on/off sw sense
• Sc sw signal
• Sc vac sol control
• Sc vent sol control
• Sci transmit
• Sensor gnd
• Stop lamp sw sense
• Stop lamp switch (brake pedal bracket)
• T10
• T41
• Torque req sense
• Tps signal
• Trans sci receive
• Transmission control module (left fender side shield)
• Transmission range switch (left side of transmission)
• Vehicle speed control servo (left strut tower)
• Vehicle speed control/horn switch
• Vss signal

2.5L, Engine Performance Wiring Diagrams (4 of 4) for Chrysler Sebring LX 1997

List of elements for 2.5L, Engine Performance Wiring Diagrams (4 of 4) for Chrysler Sebring LX 1997:

• (engine harness, near pdc breakout)
• (left kick panel)
• (top of left front strut tower)
• A/c comp rly ctrl
• A/c press sig
• A14
• A21
• Auto shut dn rly
• Batt temp sns sig
• Body control module
• C18
• C24
• C27
• C28
• Ccd bus (+)
• Ccd bus (-)
• Controller anti-lock brake (right fender side shield)
• D20
• D21
• Data link connector (left of steering column, front of bcm)
• Dnstrm htd ox sig
• Duty cycle evap/purge solenoid (left strut tower)
• Evap/prge sol ctrl
• F12
• Fuel lvl sensor sig
• Fuel pmp rly ctrl
• Fuse 5 10a
• Fused b (+)
• Fused ign sw out (run/start)
• G102
• G200
• G200 (left kick panel)
• Gnd
• Gnd
• High spd rly ctrl
• Iac driver no.1
• Iac driver no.2
• Iac driver no.3
• Iac driver no.4
• Iac no.1 driver
• Iac no.2 driver
• Iac no.3 driver
• Iac no.4 driver
• Idle air control motor (side of throttle body)
• Junction block (left side of dash)
• K10
• K106
• K107
• K118
• K141
• K29
• K31
• K39
• K40
• K51
• K52
• K59
• K60
• Leak pmp sol ctrl
• Leak pmp sw sense
• Low spd rly ctrl
• P/s press sw sense
• Pnp sw sense
• Power steering pressure switch (left side of rack)
• Powertrain control module (left fender side shield)
• Red/tan
• S101
• S127
• S133 (engine harness, ignition coil breakout)
• S133 (engine harness, pcm conn breakout)
• S134 (engine harness)
• Sc sw signal
• Sc vac sol ctrl
• Sc vent sol ctrl
• Sci receive
• Sci transmit
• Sensor gnd
• Stop lp sw sense
• T10
• T41
• Torque req sense
• V35
• V36
• V37
• Vapor canister leak detector (right front corner of engine compartment)
• Vss signal
• Z11
• Z12